Every guide on this site is written for a specific step of one path. Pick your model below and you will be taken through the same eight steps, in order, with no detours.

Pick your model

SeriesPowerPoint cloud softwareSDKStart
E seriesPoE nativeMagicViewerShared with A→ E series
M seriesPoE nativeConfiguration ToolDedicated→ M series
A series12 V, add a PoE splitterMagicViewerShared with E→ A series
C series12 V, add a PoE splitterMagicViewer ClassicDedicated→ C series
G series———→ G series

The eight steps

  1. Pick your model — you are here
  2. Wire it up — Topology & power
  3. Match your host network — Network
  4. Find the sensor — Find sensor
  5. Confirm the point cloud — First point cloud
  6. Change the IP — Set IP
  7. Calibrate — Calibration
  8. Test the interaction — Interaction test