On this page
sensors
A Series
12 V sensor, single-cable installation with a PoE splitter, MagicViewer.
At a glance
| Item | Value |
|---|---|
| Power | 12 V DC; single-cable with a PoE splitter |
| Point cloud software | MagicViewer |
| SDK | Shared with E series |
| Calibration | LiDARMagic Calibration |
| Wiring diagram | Option B — PoE with splitter |
Your path
Follow these in order. Only the first item is specific to this series.
- Topology & power — option B, splitter at the sensor end
- Network & host setup — adapter on the sensor’s subnet
- Find sensor — MagicViewer tab
- First point cloud
- Set IP — MagicViewer tab
- Calibration
- Interaction test
Model list
Model list and datasheet links for this series are being added.
Notes
The splitter converts the PoE feed back to 12 V at the sensor end. Mounting it at the switch end instead would push 12 V down the full cable run and double the current — see Topology for why that matters.