At a glance

ItemValue
PowerPoE native — no splitter needed
Point cloud softwareMagicViewer
SDKShared with A series
CalibrationLiDARMagic Calibration
Wiring diagramOption A — native PoE

Your path

  1. Topology & power — option A, one cable to the switch
  2. Network & host setup
  3. Find sensor — MagicViewer tab
  4. First point cloud
  5. Set IP — MagicViewer tab
  6. Calibration
  7. Interaction test

Model list

Notes

This is the simplest installation in the range: one cable from a PoE switch to the sensor, no inline hardware. Budget the switch port for peak current during spin-up, not steady state.